Adbruf Resin Surfacing
Resin surfacing (paving) is a beautiful modern alternative to traditional paving products such as asphalt (tarmac), concrete or block paving. Adbruf manufactures resin systems and supplies all the materials required to create stunning resin paving direct to the trade and to the public.
GeoPave Resin Bound Aggregate Surfacing (Paving)
GeoPave resin bound aggregate surfacing (paving) is applied as a layer, typically between 12 and 25 mm thick and then compacted by trowel , resulting in an even, smooth, free draining surface which is highly attractive. The beauty of the aggregates used is evident because of the clear GeoPave resin system used to coat and bind the aggregate particles.
For more information and to buy materials and ancillary equipment, please click Resin Bound Surfacing or click the button on the menu to the left.
Adtex Resin Bonded Aggregate Surfacing (Paving)
Adtex resin bonded aggregate surfacing (paving) is created by mixing the two components of the Adtex resin system to start a curing (hardening) process before the resin is spread onto the substrate and allowed to self-level. Selected, graded, loose aggregate is then scattered or 'broadcast' onto the wet resin layer or 'film'. Once the wet resin has been fully 'blinded' with aggregate, it is left to cure. Once curing is complete and the resin hardened, excess aggregate is swept off to reveal the bonded aggregate surface. Typically aggregates of no more than 5 mm in size are used and the resulting surface has a high degree of texture. The resulting surface coating is as thick as the largest aggregate particles being used.
For more information and to buy materials and ancillary equipment, please click Resin Bonded Surfacing or click the button on the menu to the left.